A
-
Abdollahipour, Abolfazl
Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
-
Abdollahipour, Abolfazl
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2022, Pages 1-18]
-
Amelsakhi, Masoud
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
-
Ameri, Mohamad Javad
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
-
Ameri Shahrabi, Mohammad Javad
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
-
Arjmand, Yaser
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
-
Asali, Majid
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
B
-
Bahrehdar, Mohammad
Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
-
Biglari, Farid Reza
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
-
Buick, James
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
C
-
Changizi, Foad
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
D
-
Dehodar, Mohsen
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Dehodar, Mohsen
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Deris Abdolah pour, Mohammad Reza
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
F
-
Faez, Mohammad
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
-
Fatehi Marji, Mohammad
Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
-
Fatehi Marji, Mohammad
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2022, Pages 1-18]
-
Fianu, John
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
G
-
Gaeini, Ahmad
Reservoir Characterization Clustering Analysis to Identify Rock Type
Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2022, Pages 35-47]
-
Gaeini, Ahmad
Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2022, Pages 48-59]
-
Ghadiri, Majid
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
-
Ghalibaf Mohammad abadi, Hamid
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
-
Gharavi, Amir
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
-
Ghasemzadeh, Hasan
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
-
Ghavami-Riabi, Reza
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
-
Gholami, Raoof
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
-
Ghoochaninejad, Hesam
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
-
Ghorbani, Hamzeh
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
-
Ghorbani, Hamzeh
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
-
Goshtasbi, Kaamran
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
-
Goshtasbi, Kaamran
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2022, Pages 48-67]
-
Goshtasbi, Kamran
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]
H
-
Hafezi Moghaddas, Naser
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
-
Hassan, Mohamed
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
-
Heydari, Mojtaba
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
-
Hosseini, Mehdi
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
J
-
Jafari, Arezou
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
-
Jalalifar, Hossein
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
-
Jamshidi, Saeid
Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2022, Pages 20-34]
K
-
Karami, Mohsen
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
-
Kazemi, Ali
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
-
Kenomore, Michael
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
-
Khezerloo-ye Aghdam, Saeed
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
-
Khezerloo-ye Aghdam, Saeed
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
-
Khodayari, Ahmadreza
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2022, Pages 48-67]
-
Khodayari, Ahmadreza
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]
-
Kiyani, Ali Reza
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
L
-
Lakirouhani, Ali
Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
-
Lashkaripour, Gholam Reza
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
M
-
Mansouri, Ali Reza
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Mirabbasi, Seyed Morteza
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
-
Mirabbasi, Seyed Morteza
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
-
MOAREFVAND, PARVIZ
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
MOAREFVAND, PARVIZ
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Mohammadizadeh, Saeed
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
N
-
Naderi, Hossein
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
-
Namdar, Hamed
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
-
Nasiri, Ali Reza
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
-
Nikkhah, Majid
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
-
Nikkhah, Mohammad Sadegh
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
-
Noroozi, mehdi
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2022, Pages 85-103]
R
-
Rahbar, Mahdi
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Rajabi, Meysam
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
-
Rajabi, Meysam
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
-
Ramezanzadeh, Ahmad
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
-
Ramezazadeh, Ahmad
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2022, Pages 85-103]
-
Razmkhah, Arash
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
S
-
Saadat, Iman
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Saeidi, Omid
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Shah, Amjad
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
-
Shamsipoor, Ali
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Shariat zadeh, Arash
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
T
-
Taheri, Ehsan
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]
-
Talebi, Hossin
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Z
-
Zafarian, Habib alah
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
-
Zalaki Nezhad, Ali
Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2022, Pages 20-34]
Your query does not match with any item